Hostsvc/advopt/options: Difference between revisions
Jump to navigation
Jump to search
m breaking output up for display purposes |
m breaking it up on another part to fix the rendering issue |
||
| Line 3,587: | Line 3,587: | ||
}, | }, | ||
}, | }, | ||
(vim.option.OptionDef) { | (vim.option.OptionDef) { | ||
dynamicType = "", | dynamicType = "", | ||
| Line 4,891: | Line 4,892: | ||
} | } | ||
] | ] | ||
example output | The example output has been broken up in 3 isolated parts so that it renders properly. This was too much content for our poor wiki engine to display in one go. | ||
[[Category: Vimsh]] | [[Category: Vimsh]] | ||
Latest revision as of 19:08, 31 December 2008
vimsh hostsvc/advopt/options
Usage: Get the list of all supported options.
example output
Attached is some example output from a pristine ESX3.5i host.
# vmware-vim-cmd -H 10.10.10.10 -U root -P password hostsvc/advopt/options
(vim.option.OptionDef) [
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "RoutingPolicy",
summary = "policy for interrupt routing, 1 for idle-routing, 2 for greedy routing, 0 to disable moving IRQs",
key = "Irq.RoutingPolicy",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2,
defaultValue = 2,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "BestVcpuRouting",
summary = "",
key = "Irq.BestVcpuRouting",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IRQRebalancePeriod",
summary = "time in ms between attempts to rebalance interrupts",
key = "Irq.IRQRebalancePeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 10,
max = 20000,
defaultValue = 50,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IRQMaxLoadPct",
summary = "maximum percentage of a cpu's resources that should be devoted to interrupts",
key = "Irq.IRQMaxLoadPct",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100,
defaultValue = 70,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LogToFile",
summary = "Send vmkernel log messages to /var/log/vmkernel",
key = "Misc.LogToFile",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LogToSerial",
summary = "Send vmkernel log messages to the serial port",
key = "Misc.LogToSerial",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LogWldPrefix",
summary = "Including running world on every log statement",
key = "Misc.LogWldPrefix",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MinimalPanic",
summary = "Don't attempt to coredump after PSODing",
key = "Misc.MinimalPanic",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "BlueScreenTimeout",
summary = "timeout in seconds, 0 is no timeout",
key = "Misc.BlueScreenTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 65535,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HeartbeatTimeout",
summary = "Timeout in seconds, for sending NMI to the locked CPU",
key = "Misc.HeartbeatTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 86400,
defaultValue = 60,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HeartbeatInterval",
summary = "Interval in msec to check CPU lockups",
key = "Misc.HeartbeatInterval",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 86400000,
defaultValue = 10000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HeartbeatPanicTimeout",
summary = "Interval in seconds after which to panic if no heartbeats received",
key = "Misc.HeartbeatPanicTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 60,
max = 86400,
defaultValue = 1800,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HeartbeatAnyPcpuPanic",
summary = "Should we panic on any cpu lockups? (default we panic only for COS)",
key = "Misc.HeartbeatAnyPcpuPanic",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MCEMonitorInterval",
summary = "Interval[1 - 0x0xffffffff secs] to check Machine Check Errors",
key = "Misc.MCEMonitorInterval",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = -1,
defaultValue = 15,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "DebugMemEnable",
summary = "Enable memory debugging, 0 to disable",
key = "Misc.DebugMemEnable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "DebugBuddyEnable",
summary = "Enable buddy debugging, 0 to disable",
key = "Misc.DebugBuddyEnable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "EnableHighDMA",
summary = "Enable DMA above 4GB",
key = "Misc.EnableHighDMA",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TimerMinHardPeriod",
summary = "Minimum hard timer interrupt period in microseconds",
key = "Misc.TimerMinHardPeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 10000,
defaultValue = 100,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TimerMaxHardPeriod",
summary = "Maximum hard timer interrupt period in microseconds",
key = "Misc.TimerMaxHardPeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 10000,
defaultValue = 2000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TimerMinGuestPeriod",
summary = "Minimum period for guest timer callbacks in microseconds",
key = "Misc.TimerMinGuestPeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 1000000,
defaultValue = 100,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MemAdmitMapEntriesMin",
summary = "free KVMap entries required to power on VM",
key = "Misc.MemAdmitMapEntriesMin",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100,
defaultValue = 30,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MemMapEntriesLow",
summary = "Point at which to start conserving KVMap entries",
key = "Misc.MemMapEntriesLow",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1024,
defaultValue = 200,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "KVMapGuardUncached",
summary = "use guard pages around uncached kvmap mappings",
key = "Misc.KVMapGuardUncached",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SerialPort",
summary = "Which serial port (1 or 2) to use for logging, or 0 for neither.",
key = "Misc.SerialPort",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SerialBaudRate",
summary = "Baud rate",
key = "Misc.SerialBaudRate",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 9600,
max = 115200,
defaultValue = 115200,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "WatchdogBacktrace",
summary = "Backtrace on every nth watchdog",
key = "Misc.WatchdogBacktrace",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 10,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "BHTimeout",
summary = "Timeout for bottom-half handlers in milliseconds",
key = "Misc.BHTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 5000,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "BhTimeBound",
summary = "Time bound on BH checking in us (microseconds).",
key = "Misc.BhTimeBound",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 500000,
defaultValue = 2000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IntTimeout",
summary = "Timeout for interrupt handlers in milliseconds",
key = "Misc.IntTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 5000,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "RunningVCpuLimit",
summary = "The limit for the number of VCPUs",
key = "Misc.RunningVCpuLimit",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1024,
defaultValue = 128,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HordeEnabled",
summary = "Enables horde mode",
key = "Misc.HordeEnabled",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "AckActual",
summary = "Ack actual end",
key = "Misc.AckActual",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "NoWaitOnSocket",
summary = "Don't wait on socket",
key = "Misc.NoWaitOnSocket",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ScreenSaverDelay",
summary = "Delay in minutes before screensaver kicks in",
key = "Misc.ScreenSaverDelay",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 60,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CimEnabled",
summary = "Enable CIM Service",
key = "Misc.CimEnabled",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CimOemProvidersEnabled",
summary = "Enable OEM Providers",
key = "Misc.CimOemProvidersEnabled",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CimIHVProvidersEnabled",
summary = "Enable IHV Providers",
key = "Misc.CimIHVProvidersEnabled",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CimWatchdogInterval",
summary = "Seconds of delay between sfcbd poll",
key = "Misc.CimWatchdogInterval",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 86400,
defaultValue = 60,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "FSSLightWeightProbe",
summary = "Enable light-weight efficient probe of ESX supported datastores",
key = "Misc.FSSLightWeightProbe",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ProcVerbose",
summary = "option unused",
key = "Misc.ProcVerbose",
optionType = (vim.option.StringOption) {
dynamicType = <unset>,
valueIsReadonly = false,
defaultValue = "",
validCharacters = "**",
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxPortRxQueueLen",
summary = "Max length of the rx queue for virtual ports whose clients support queueing.",
key = "Net.MaxPortRxQueueLen",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 500,
defaultValue = 80,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxNetifRxQueueLen",
summary = "Max length of the rx queue for the physical NICs.",
key = "Net.MaxNetifRxQueueLen",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 1000,
defaultValue = 100,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxNetifTxQueueLen",
summary = "Max length of the tx queue for the physical NICs.",
key = "Net.MaxNetifTxQueueLen",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 1000,
defaultValue = 200,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "GuestTxCopyBreak",
summary = "transmits smaller than this will be copied rather than mapped.",
key = "Net.GuestTxCopyBreak",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 60,
max = -1,
defaultValue = 64,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VmxnetTxCopySize",
summary = "vmxnet tx <= than this will be fully copied with no need for completion.",
key = "Net.VmxnetTxCopySize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = -1,
defaultValue = 256,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VmxnetWinUDPTxFullCopy",
summary = "whether Windows vmxnet UDP tx is fullCopy.",
key = "Net.VmxnetWinUDPTxFullCopy",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "UseProc",
summary = "whether or not to populate /proc/vmware/net. [0 = disabled, 1 = enabled]",
key = "Net.UseProc",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "UseLegacyProc",
summary = "whether or not to populate legacy entries in /proc/vmware/net. [0 = disabled, 1 = enabled]",
key = "Net.UseLegacyProc",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "NotifySwitch",
summary = "Broadcasts an arp request on net handle enable. [0 = disabled, 1 = enabled]",
key = "Net.NotifySwitch",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "NetTxDontClusterSize",
summary = "transmits smaller than this will not be subject to clustering/coalescing.",
key = "Net.NetTxDontClusterSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 8192,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "NetPktAllocTries",
summary = "Number of tries for allocating pkt within the page.",
key = "Net.NetPktAllocTries",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 10,
defaultValue = 5,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CoalesceTxTimeout",
summary = "set the coalesce timeout in micro-seconds.",
key = "Net.CoalesceTxTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = -1,
defaultValue = 2000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CoalesceDefaultOn",
summary = "whether dynamic coalescing is on by default. [0 = disabled by default, 1 = enabled by default]",
key = "Net.CoalesceDefaultOn",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CoalesceLowTxMsRate",
summary = "No tx coalescing calibration when the number of pkts tx per ms is lower than this number.",
key = "Net.CoalesceLowTxMsRate",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 64,
defaultValue = 4,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CoalesceLowRxMsRate",
summary = "No rx coalescing calibration when the number of pkts rx per ms is lower than this number.",
key = "Net.CoalesceLowRxMsRate",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 64,
defaultValue = 6,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CoalesceHandlerPcpu",
summary = "Pcpu that coalesce timeout handler runs on.",
key = "Net.CoalesceHandlerPcpu",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 32,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CoalesceTxAlwaysPoll",
summary = "Whether always poll Tx at coalesce timeout handler.",
key = "Net.CoalesceTxAlwaysPoll",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "vmxnetBHNetPoll",
summary = "Whether to poll for Tx in BH NetPoll.",
key = "Net.vmxnetBHNetPoll",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "vmxnetThroughputWeight",
summary = "How far to favor throughput in vmxnet behavior.",
key = "Net.vmxnetThroughputWeight",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 255,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "EtherswitchHashSize",
summary = "number of ports on the switch x 2^N is the size of the hash table for looking up MACs.",
key = "Net.EtherswitchHashSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 4,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "NoLocalCSum",
summary = "if set, don't bother checksumming local tx/rx frames.",
key = "Net.NoLocalCSum",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PortSerializeInput",
summary = "if enabled(1), input into port through appropriate calls are serialized to prevent out-of-order delivery.",
key = "Net.PortSerializeInput",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PortFlushIterLimit",
summary = "when input is serialized, this bounds the number of times a thread flushes the deferred list.",
key = "Net.PortFlushIterLimit",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 127,
defaultValue = 2,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PortFlushPktLimit",
summary = "when input is serialized, this bounds the number of pkts a thread flushes from the deferred list.",
key = "Net.PortFlushPktLimit",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 255,
defaultValue = 64,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PortTrackTxRace",
summary = "if enabled(1), collect statistics on potential tx race between concurrent threads.",
key = "Net.PortTrackTxRace",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PortKeepDetailedStats",
summary = "if enabled(1), collect detailed statistics on port.",
key = "Net.PortKeepDetailedStats",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PortDisableTimeout",
summary = "max timeout delay to wait for ports to complete I/O before disabling.",
key = "Net.PortDisableTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 5000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TcpipHeapSize",
summary = "Initial size of the tcpip module heap in megabytes. (REQUIRES REBOOT!)",
key = "Net.TcpipHeapSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 6,
max = 30,
defaultValue = 9,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TcpipHeapMax",
summary = "Max megabytes the tcpip module heap can grow to. (REQUIRES REBOOT!)",
key = "Net.TcpipHeapMax",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 30,
max = 120,
defaultValue = 30,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxPageInQueueLen",
summary = "maximum number of pageing requests to queue for guest DMA.",
key = "Net.MaxPageInQueueLen",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 5000,
defaultValue = 500,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxBeaconsAtOnce",
summary = "maximum number of beacons to send in one beacon cycle.",
key = "Net.MaxBeaconsAtOnce",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 4096,
defaultValue = 100,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxBeaconVlans",
summary = "maximum number of VLANs to probe with beacons.",
key = "Net.MaxBeaconVlans",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 4096,
defaultValue = 100,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TcpipNoBcopyRx",
summary = "Avoid bcopy in tcp rx.",
key = "Net.TcpipNoBcopyRx",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TcpipCopySmallTx",
summary = "Copy and tx complete small packets for tcp tx.",
key = "Net.TcpipCopySmallTx",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TcpipLargeRx",
summary = "Allow frames larger than mtu for tcp rx.",
key = "Net.TcpipLargeRx",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TcpipMaxPktInFlight",
summary = "Maximum zero copy mbuf packet in flight.",
key = "Net.TcpipMaxPktInFlight",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 10000,
defaultValue = 1000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TcpipDelayedAck",
summary = "Enable/Disable delayed ACKs.",
key = "Net.TcpipDelayedAck",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LinkStatePollTimeout",
summary = "Link State poll timer period in milliseconds.",
key = "Net.LinkStatePollTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1000,
max = 90000,
defaultValue = 5000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TcpipUseIoat",
summary = "Use IOAT chipset if present. (REQUIRES REBOOT!)",
key = "Net.TcpipUseIoat",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TcpipIoatAlwaysWakeup",
summary = "Wakeup soreceive thread on every tcp packet (for IOAT only).",
key = "Net.TcpipIoatAlwaysWakeup",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "E1000TxZeroCopy",
summary = "Use tx zero copy for non-tso packets for e1000.",
key = "Net.E1000TxZeroCopy",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "E1000TxTsoZeroCopy",
summary = "Use tx zero copy for tso packets for e1000.",
key = "Net.E1000TxTsoZeroCopy",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MinEtherLen",
summary = "Minimum size ethernet frame to transmit.",
key = "Net.MinEtherLen",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1518,
defaultValue = 60,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxPktRxListQueue",
summary = "Maximum packet we can queue in rxList.",
key = "Net.MaxPktRxListQueue",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 200000,
defaultValue = 3500,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "NetBHRxWorkBound",
summary = "Maximum rx pkts processed in one NetBH invocation.",
key = "Net.NetBHRxWorkBound",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 200000,
defaultValue = 320,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "NetBHRxInputBound",
summary = "Maximum rx pkts sent up an uplink at one go.",
key = "Net.NetBHRxInputBound",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 200000,
defaultValue = 64,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "NetBHRxStormThreshold",
summary = "Declare Rx Storm after this number of consecutive rx pkt drops during queuing in NetBH rxList.",
key = "Net.NetBHRxStormThreshold",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 200000,
defaultValue = 320,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ReversePathFwdCheck",
summary = "Block the multicast/broadcast packets that come back from physical switches in a teamed environment.",
key = "Net.ReversePathFwdCheck",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "AllowPromiscFilters",
summary = "Block duplicate multicast/broadcast packet in a teamed environment when the virtual switch is set to Promiscuous mode.",
key = "Net.AllowPromiscFilters",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "Vmxnet2PinRxBuf",
summary = "Pin RX buffers for vmxnet2 clients. (windows guest only)",
key = "Net.Vmxnet2PinRxBuf",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TsoDumpPkt",
summary = "detailed dump of every <n> pkts.",
key = "Net.TsoDumpPkt",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IGMPVersion",
summary = "IGMP Version (2 or 3).",
key = "Net.IGMPVersion",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 2,
max = 3,
defaultValue = 3,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IGMPQueries",
summary = "Number of IGMP Queries to send during after VMotion/Teaming failover.",
key = "Net.IGMPQueries",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2,
defaultValue = 2,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "NcpLlcSap",
summary = "beacon/color NCP messages created with this SAP (DSAP/SSAP)",
key = "Net.NcpLlcSap",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 255,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IGMPRouterIP",
summary = "Router IP Address for IGMP (generally not necessary to set this).",
key = "Net.IGMPRouterIP",
optionType = (vim.option.StringOption) {
dynamicType = <unset>,
valueIsReadonly = false,
defaultValue = "10.0.0.0",
validCharacters = "10.0.0.0",
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "BalancePeriod",
summary = "period in seconds, 0 to disable",
key = "Mem.BalancePeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 120,
defaultValue = 15,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SamplePeriod",
summary = "period in seconds, 0 to disable",
key = "Mem.SamplePeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 180,
defaultValue = 60,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IdleTax",
summary = "idle memory tax rate",
key = "Mem.IdleTax",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 99,
defaultValue = 75,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IdleTaxType",
summary = "idle tax type. 0=flat, 1=variable",
key = "Mem.IdleTaxType",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SampleActivePctMin",
summary = "lower bound for sampled active memory",
key = "Mem.SampleActivePctMin",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 10,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ShareScanGHz",
summary = "max page scan rate in MB/sec per GHz of host CPU, 0 to disable",
key = "Mem.ShareScanGHz",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 32,
defaultValue = 4,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ShareScanTime",
summary = "desired time in minutes to scan entire VM",
key = "Mem.ShareScanTime",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 10,
max = 600,
defaultValue = 60,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ShareRateMax",
summary = "per-VM upper limit on pshare scan/check rate in pages/sec. (0 to disable)",
key = "Mem.ShareRateMax",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 32768,
defaultValue = 1024,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CtlMaxPercent",
summary = "vmmemctl limit as percentage of VM max size",
key = "Mem.CtlMaxPercent",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 75,
defaultValue = 65,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "AllocHighThreshold",
summary = "Threshold (in MB) at which we start allocating memory above 4GB",
key = "Mem.AllocHighThreshold",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 4096,
defaultValue = 1500,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "AllocGuestLargePage",
summary = "Enable large page backing of guest memory",
key = "Mem.AllocGuestLargePage",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "AllocUsePSharePool",
summary = "Use pshare pool to allocate memory for shared pages",
key = "Mem.AllocUsePSharePool",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "AllocUseGuestPool",
summary = "Use large page pool to allocate memory for guest pages",
key = "Mem.AllocUseGuestPool",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "AdmitHeapMin",
summary = "free heap space required to power on VM, in KB",
key = "Mem.AdmitHeapMin",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 256,
max = 10240,
defaultValue = 1024,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MinFreePct",
summary = "Minimum percent of memory that should be kept free",
key = "Mem.MinFreePct",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 6,
max = 24,
defaultValue = 6,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ShareCOSBufSize",
summary = "Specify number of MPNs to be used by COW P2M buffer",
key = "Mem.ShareCOSBufSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 2,
max = 8,
defaultValue = 2,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SwapIORetry",
summary = "Number of retries for swap-in operation on I/O failures",
key = "Mem.SwapIORetry",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100000,
defaultValue = 5000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TestOnAlloc",
summary = "Check the newly allocated page for Memory Errors",
key = "Mem.TestOnAlloc",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ShareEstimatePeriod",
summary = "Sleep interval for pshare-est daemon world",
key = "Mem.ShareEstimatePeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1000,
max = 300000,
defaultValue = 30000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ShareEstimateProbe",
summary = "Maximum per-VM page probes for pshare estimation",
key = "Mem.ShareEstimateProbe",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 5000,
defaultValue = 200,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ShareEstimateSamples",
summary = "Minimum required per-VM page samples for pshare estimation",
key = "Mem.ShareEstimateSamples",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 100,
defaultValue = 100,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "kernelResvPad",
summary = "Extra padding (in MB) for MemSched's tracking of kernel memory usage",
key = "Mem.kernelResvPad",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 128,
defaultValue = 16,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LogLowMemoryStateUsage",
summary = "Log memory usage of memclients during low memory state",
key = "Mem.LogLowMemoryStateUsage",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LogLowMemoryStateBT",
summary = "Log back-trace of contexts that allocate MPNs during low memory state",
key = "Mem.LogLowMemoryStateBT",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SwapDecayPct",
summary = "Percentage of swap target to be proactively transferred to balloon target",
key = "Mem.SwapDecayPct",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100,
defaultValue = 5,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "DesiredAllocEnable",
summary = "Enable use of desired allocations when computing allocation targets",
key = "Mem.DesiredAllocEnable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "DesiredAllocPct",
summary = "Percentage of consumed memory to be considered as the desired allocation target",
key = "Mem.DesiredAllocPct",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 200,
defaultValue = 125,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "BonusAllocPct",
summary = "Percentage of group allocation to be distributed to children as bonus",
key = "Mem.BonusAllocPct",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100,
defaultValue = 5,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SwapFilePersist",
summary = "The swap file is not deleted when the VM powers off, 1 to enable",
key = "Mem.SwapFilePersist",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SwapInBatchPages",
summary = "Number of pages swapped in per batch during opportunistic prefaulting",
key = "Mem.SwapInBatchPages",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 512,
defaultValue = 64,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SwapAsyncWritePages",
summary = "Maximum allowed pending asynchronous swapout requests per VM",
key = "Mem.SwapAsyncWritePages",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 16,
max = 64,
defaultValue = 20,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HostLocalSwapDirEnabled",
summary = "Enable use of host-local swap directory",
key = "Mem.HostLocalSwapDirEnabled",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TrackUsageAllocAllowance",
summary = "Memory alloc allowance (in 4K pages) while usage is tracked via heartbeat or swap action post",
key = "Mem.TrackUsageAllocAllowance",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 64,
max = 4096,
defaultValue = 2048,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TrackUsageSwapAllowance",
summary = "Memory swap allowance (in 4K pages) while usage is tracked via heartbeat or swap action post",
key = "Mem.TrackUsageSwapAllowance",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 64,
max = 4096,
defaultValue = 2048,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TrackUsageLPageAllowance",
summary = "Memory large page alloc allowance (in 2M pages) while usage is tracked via heartbeat action post",
key = "Mem.TrackUsageLPageAllowance",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 256,
defaultValue = 8,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TrackUsageHeartbeatPeriod",
summary = "Sleep interval in seconds for busmem heartbeat",
key = "Mem.TrackUsageHeartbeatPeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 5,
max = 300,
defaultValue = 30,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TrackUsageHeartbeatEnable",
summary = "Enable/disable MPN usage tracking via heartbeat monitor action (0 for disable)",
key = "Mem.TrackUsageHeartbeatEnable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMOverheadGrowthLimit",
summary = "Default limit (in MB) on VM overhead memory growth",
key = "Mem.VMOverheadGrowthLimit",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = -1,
defaultValue = -1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HostLocalSwapDir",
summary = "Host-local directory for VM swap files",
key = "Mem.HostLocalSwapDir",
optionType = (vim.option.StringOption) {
dynamicType = <unset>,
valueIsReadonly = false,
defaultValue = "",
validCharacters = "**",
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MigratePeriod",
summary = "milliseconds between opportunities to migrate across cpus",
key = "Cpu.MigratePeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 5000,
defaultValue = 20,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CellMigratePeriod",
summary = "milliseconds between opportunities to migrate across cells",
key = "Cpu.CellMigratePeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 60000,
defaultValue = 1000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "WakeupMigrateIdle",
summary = "migrate to idle package on wakeup, 0 to disable",
key = "Cpu.WakeupMigrateIdle",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PcpuMigrateIdle",
summary = "always migrate from remote pcpus when a core becomes idle, 0 to disable",
key = "Cpu.PcpuMigrateIdle",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CreditAgePeriod",
summary = "period in milliseconds",
key = "Cpu.CreditAgePeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 500,
max = 10000,
defaultValue = 3000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "BoundLagQuanta",
summary = "number of global quanta before bound lag",
key = "Cpu.BoundLagQuanta",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 100,
defaultValue = 8,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CacheStats",
summary = "enable per-world cache data collection",
key = "Cpu.CacheStats",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "Quantum",
summary = "quantum in milliseconds",
key = "Cpu.Quantum",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 1000,
defaultValue = 50,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SkewPollUsec",
summary = "interval between coscheduling skew checks, in usec",
key = "Cpu.SkewPollUsec",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 500,
max = 5000,
defaultValue = 1000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SkewInstanceThreshold",
summary = "maximum individual skew between vcpus in usec, 0 to disable",
key = "Cpu.SkewInstanceThreshold",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100000,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SkewCumulativeThreshold",
summary = "maximum cumulative skew between vcpus in usec, 0 to disable",
key = "Cpu.SkewCumulativeThreshold",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100000,
defaultValue = 5000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IdlePackageRebalancePeriod",
summary = "usec between chances to rebalance idle packages (0 to disable, 100000 max)",
key = "Cpu.IdlePackageRebalancePeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100000,
defaultValue = 541,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IntraCoreMigrate",
summary = " When to allow intra-core migrations [0:when inter-core migration allowed, 1:always]",
key = "Cpu.IntraCoreMigrate",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMotionMinAllocPct",
summary = "Per-VM minimum CPU allocations (in %) for VMotion requirements",
key = "Cpu.VMotionMinAllocPct",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 200,
defaultValue = 30,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMAdmitCheckPerVcpuMin",
summary = "Perform additional admission control check that per vcpu VM cpu min does not exceed the speed of a single physical cpu. [0:dis",
key = "Cpu.VMAdmitCheckPerVcpuMin",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CoSchedIdleBalancePeriod",
summary = "millisecs between opportunities to move co-scheduled vcpus to more idle cores and packages, 0 to disable",
key = "Cpu.CoSchedIdleBalancePeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100000,
defaultValue = 1000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "RebalancePeriod",
summary = "frequency of NUMA node rebalancing, in milliseconds",
key = "Numa.RebalancePeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 60000,
defaultValue = 2000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MigImbalanceThreshold",
summary = "minimum percent load imbalance between nodes to trigger migration",
key = "Numa.MigImbalanceThreshold",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 200,
defaultValue = 10,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MigThreshold",
summary = "minimum percent load balance improvement to allow single migration/swap",
key = "Numa.MigThreshold",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100,
defaultValue = 2,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MigThrashThreshold",
summary = "maximum post-migration load imbalance, as percentage of pre-migration imbalance, to prevent thrashing",
key = "Numa.MigThrashThreshold",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100,
defaultValue = 50,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SwapLoadEnable",
summary = "1 to enable VM swaps across nodes to balance CPU load, 0 to disable",
key = "Numa.SwapLoadEnable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SwapLocalityEnable",
summary = "1 to enable VM swaps across nodes to improve memory locality, 0 to disable",
key = "Numa.SwapLocalityEnable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "RebalanceEnable",
summary = "1 to enable NUMA rebalancer, 0 to disable it",
key = "Numa.RebalanceEnable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "RebalanceCoresTotal",
summary = "minimum number of total host cores required to enable NUMA rebalancer",
key = "Numa.RebalanceCoresTotal",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 32,
defaultValue = 4,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "RebalanceCoresNode",
summary = "minimum number of cores per node required to enable NUMA rebalancer",
key = "Numa.RebalanceCoresNode",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 8,
defaultValue = 2,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MonMigEnable",
summary = "1 to allow NUMASched monitor migrations, 0 to disallow",
key = "Numa.MonMigEnable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "AutoMemAffinity",
summary = "1 to set mem affinity automatically based on cpu affinity, 0 to disable",
key = "Numa.AutoMemAffinity",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PageMigEnable",
summary = "1 to permit NUMASched to manipulate page migration, 0 to disallow it",
key = "Numa.PageMigEnable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PostMigUseActiveMetric",
summary = "1 to use alternative migActive metric for post-migration imbalance prediction, 0 to use default migEntitlement metric",
key = "Numa.PostMigUseActiveMetric",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LPageDefragEnable",
summary = "Enable large page defragmentation",
key = "LPage.LPageDefragEnable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LPageMarkLowNodes",
summary = "Enable marking of nodes with low large pages free",
key = "LPage.LPageMarkLowNodes",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LPageDefragRateVM",
summary = "Maximum number of lpage defrag attempts per second per VM",
key = "LPage.LPageDefragRateVM",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 1024,
defaultValue = 2,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LPageDefragRateTotal",
summary = "Maximum number of lpage defrag attempts per second ",
key = "LPage.LPageDefragRateTotal",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 10240,
defaultValue = 8,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LPageAlwaysTryForNPT",
summary = "Enable always try to alloc large page for NPT",
key = "LPage.LPageAlwaysTryForNPT",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SharesNormal",
summary = "shares for normal/default disk priority",
key = "Disk.SharesNormal",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 10000,
defaultValue = 1000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SharesHigh",
summary = "shares for high disk priority",
key = "Disk.SharesHigh",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 10000,
defaultValue = 2000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SharesLow",
summary = "shares for low disk priority",
key = "Disk.SharesLow",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 10000,
defaultValue = 500,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "BandwidthCap",
summary = "cap on disk bandwidth (Kb/s) usage",
key = "Disk.BandwidthCap",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 10,
max = 2147483647,
defaultValue = 2147483647,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ThroughputCap",
summary = "cap on disk throughput (IO/S) usage",
key = "Disk.ThroughputCap",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 10,
max = 2147483647,
defaultValue = 2147483647,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SectorMaxDiff",
summary = "Distance in sectors at which disk BW sched affinity stops",
key = "Disk.SectorMaxDiff",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2000000,
defaultValue = 2000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SchedQuantum",
summary = "Number of consecutive requests from one World",
key = "Disk.SchedQuantum",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 64,
defaultValue = 8,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SchedNumReqOutstanding",
summary = "Number of outstanding commands to a target with competing worlds",
key = "Disk.SchedNumReqOutstanding",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 256,
defaultValue = 32,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SchedQControlSeqReqs",
summary = "Number of consecutive requests from a VM required to raise the outstanding commands to max",
key = "Disk.SchedQControlSeqReqs",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2048,
defaultValue = 128,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SchedQControlVMSwitches",
summary = "Number of switches between commands issued by different VMs required to reduce outstanding commands to SchedNumReqOutstanding",
key = "Disk.SchedQControlVMSwitches",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2048,
defaultValue = 6,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxLUN",
summary = "Maximum LUN id that is scanned on a target",
key = "Disk.MaxLUN",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 256,
defaultValue = 256,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SupportSparseLUN",
summary = "Support for sparse LUNs if set to one",
key = "Disk.SupportSparseLUN",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "UseReportLUN",
summary = "Use the REPORT LUN command to speed up scanning for devices",
key = "Disk.UseReportLUN",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "UseDeviceReset",
summary = "Use device reset (instead of bus reset) to reset a SCSI device",
key = "Disk.UseDeviceReset",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "UseLunReset",
summary = "Use LUN reset (instead of device/bus reset) to reset a SCSI device",
key = "Disk.UseLunReset",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "RetryUnitAttention",
summary = "Retry all SCSI commands that return a unit attention error",
key = "Disk.RetryUnitAttention",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ResetOnFailover",
summary = "Issue a SCSI reset when failing over to an alternate HBA",
key = "Disk.ResetOnFailover",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PathEvalTime",
summary = "The number of seconds between FC path evaluations",
key = "Disk.PathEvalTime",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 30,
max = 1500,
defaultValue = 300,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxVCNotReadyTime",
summary = "The number of seconds a VC path can report NOT READY status before being declared dead",
key = "Disk.MaxVCNotReadyTime",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 15,
max = 90,
defaultValue = 60,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxDS400NotReadyTime",
summary = "The number of seconds a DS400 path can report IN TRANSITION before being declared dead",
key = "Disk.MaxDS400NotReadyTime",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 15,
max = 90,
defaultValue = 60,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "EnableNaviReg",
summary = "Enable automatic NaviAgent registration with CLARiiON and Invista (vmvisor only)",
key = "Disk.EnableNaviReg",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "DelayOnBusy",
summary = "Delay in milliseconds for completion of commands with a BUSY status",
key = "Disk.DelayOnBusy",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 5000,
defaultValue = 400,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ResetLatency",
summary = "Delay in milliseconds between reset thread wake-ups",
key = "Disk.ResetLatency",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 600000,
defaultValue = 1000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxResetLatency",
summary = "Delay in milliseconds before logging warnings and spawning new reset worlds if a reset is overdue or taking too long",
key = "Disk.MaxResetLatency",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 500,
max = 600000,
defaultValue = 2000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ResetPeriod",
summary = "Delay in seconds between bus resets retries",
key = "Disk.ResetPeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 3600,
defaultValue = 30,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ResetMaxRetries",
summary = "Max number of bus reset retries (0=infinite)",
key = "Disk.ResetMaxRetries",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 10000,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ResetThreadMin",
summary = "Min number of reset handler threads",
key = "Disk.ResetThreadMin",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 16,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ResetThreadMax",
summary = "Max number of reset handler threads",
key = "Disk.ResetThreadMax",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 16,
defaultValue = 16,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ResetThreadExpires",
summary = "Life in seconds of an inactive reset handle thread",
key = "Disk.ResetThreadExpires",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 86400,
defaultValue = 1800,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ResetOverdueLogPeriod",
summary = "Delay in seconds between logs of overdue reset",
key = "Disk.ResetOverdueLogPeriod",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 10,
max = 86400,
defaultValue = 60,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SPBlksToSwitch",
summary = "Number of blocks of I/O sent over a given path before a path switch (0=infinite)",
key = "Disk.SPBlksToSwitch",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1000000,
defaultValue = 2048,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SPCmdsToSwitch",
summary = "Number of I/O commands sent over a given path before a path switch (0=infinite) ",
key = "Disk.SPCmdsToSwitch",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1000000,
defaultValue = 50,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PreventVMFSOverwrite",
summary = "Prevent Console OS from overwriting VMFS partitions",
key = "Disk.PreventVMFSOverwrite",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "DumpMaxRetries",
summary = "Max number of I/O retries during disk dump",
key = "Disk.DumpMaxRetries",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1000,
defaultValue = 10,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "DiskMaxIOSize",
summary = "Max Disk READ/WRITE I/O size before splitting (in KB)",
key = "Disk.DiskMaxIOSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 32,
max = 32767,
defaultValue = 32767,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaskLUNs",
summary = "LUN's to mask from kernel. Format: <adapter>:<target>:<comma separated LUN range list>",
key = "Disk.MaskLUNs",
optionType = (vim.option.StringOption) {
dynamicType = <unset>,
valueIsReadonly = false,
defaultValue = "",
validCharacters = "**",
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SANDevicesWithAPFailover",
summary = "SAN devices with Active/Passive Path Failover. Format: <16 Character Device Id>:<16 Character Device Id>:...",
key = "Disk.SANDevicesWithAPFailover",
optionType = (vim.option.StringOption) {
dynamicType = <unset>,
valueIsReadonly = false,
defaultValue = "",
validCharacters = "**",
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "Enabled",
summary = "Enable hot migration support",
key = "Migrate.Enabled",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PreCopyLeftMB",
summary = "Maximum modified memory left over after pre-copy is done",
key = "Migrate.PreCopyLeftMB",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 1024,
defaultValue = 16,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PreCopyMinProgressMB",
summary = "Minimum reduction in modified memory after a pre-copy iteration",
key = "Migrate.PreCopyMinProgressMB",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 1024,
defaultValue = 16,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "NetTimeout",
summary = "Timeout for migration network operations",
key = "Migrate.NetTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 3600,
defaultValue = 20,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MemChksum",
summary = "Checksum VM's memory while migrating",
key = "Migrate.MemChksum",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TSMaster",
summary = "Pseudo-synchronize clocks for migration to/from this machine",
key = "Migrate.TSMaster",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PageInTimeout",
summary = "Time in seconds to wait for page-in to finish",
key = "Migrate.PageInTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 10,
max = 18000,
defaultValue = 100,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PageInTimeoutResetOnProgress",
summary = "Page-in progess will reset the page-in timeout",
key = "Migrate.PageInTimeoutResetOnProgress",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PageInProgress",
summary = "Time in seconds after which a page-in will be killed if there is no progress",
key = "Migrate.PageInProgress",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 5,
max = 18000,
defaultValue = 15,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PageInBeforeResume",
summary = "Wait for page-in to finish before resuming on the dest",
key = "Migrate.PageInBeforeResume",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PassthroughLocking",
summary = "Disable locking for scsi passthrough devices",
key = "Scsi.PassthroughLocking",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ConflictRetries",
summary = "Maximum number of retries when encountering reservation conflict.",
key = "Scsi.ConflictRetries",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 200,
defaultValue = 80,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LogMultiPath",
summary = "Log path state changes",
key = "Scsi.LogMultiPath",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LogAborts",
summary = "Log timing of aborted or reseted IOs",
key = "Scsi.LogAborts",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PrintCmdErrors",
summary = "Print the error to log on a SCSI command error.",
key = "Scsi.PrintCmdErrors",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxReserveTime",
summary = "Maximum time (in msecs) a system-initiated reservation is normally held (debug only)",
key = "Scsi.MaxReserveTime",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 50,
max = 500,
defaultValue = 200,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxReserveTotalTime",
summary = "Maximum time (in msecs) a system-initiated reservation normally takes from issue to release (debug only)",
key = "Scsi.MaxReserveTotalTime",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 50,
max = 500,
defaultValue = 250,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxReserveBacktrace",
summary = "Log a backtrace if caller exceeds SCSI_MAX_RESERVE_TIME or SCSI_MAX_RESERVE_TOTALTIME (debug only)",
key = "Scsi.MaxReserveBacktrace",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ReserveBacktrace",
summary = "Log a backtrace for all Reserve/Release pairs (debug only)",
key = "Scsi.ReserveBacktrace",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SCSITimeout_ScanTime",
summary = "time (in ms) to sleep between checking for timed-out async IO",
key = "Scsi.SCSITimeout_ScanTime",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 99999999,
defaultValue = 1000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SCSITimeout_ReabortTime",
summary = "delay (in ms) after an abort due to timeout before the abort is re-issued",
key = "Scsi.SCSITimeout_ReabortTime",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 99999999,
defaultValue = 5000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ScanOnDriverLoad",
summary = "Scan new SCSI buses on device driver load",
key = "Scsi.ScanOnDriverLoad",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TimeoutTMThreadMin",
summary = "Min number of timeout task-mgmt handler threads",
key = "Scsi.TimeoutTMThreadMin",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 16,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TimeoutTMThreadMax",
summary = "Max number of device task-mgmt handler threads",
key = "Scsi.TimeoutTMThreadMax",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 16,
defaultValue = 16,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TimeoutTMThreadExpires",
summary = "Life in seconds of timeout task mgmt handler thread",
key = "Scsi.TimeoutTMThreadExpires",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 86400,
defaultValue = 1800,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TimeoutTMThreadRetry",
summary = "Delay in milliseconds before retrying failed timeout taskmgmt",
key = "Scsi.TimeoutTMThreadRetry",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1000,
max = 100000,
defaultValue = 40000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "TimeoutTMThreadLatency",
summary = "Delay in ms before waking up new task mgmt thread ",
key = "Scsi.TimeoutTMThreadLatency",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 600000,
defaultValue = 2000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ScsiRestartStalledQueueLatency",
summary = "Delay in ms before restarting a stalled queue ",
key = "Scsi.ScsiRestartStalledQueueLatency",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 60000,
defaultValue = 500,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CompareLUNNumber",
summary = "Consider LUN number when determining LUN identity.",
key = "Scsi.CompareLUNNumber",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ScsiRescanAllHbas",
summary = "During esxcfg-rescan, rescan all vmhbas at once rather than just a single vmhba",
key = "Scsi.ScsiRescanAllHbas",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ReaddirRetries",
summary = "Maximum number of retries when reading entries from directories",
key = "User.ReaddirRetries",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 20,
defaultValue = 10,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "CDROMSenseTimeout",
summary = "Physical CDROM sense timeout (seconds)",
key = "User.CDROMSenseTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 8,
defaultValue = 4,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "PTEDisableNX",
summary = "Disables the use of NX bit in user pagetable entries",
key = "User.PTEDisableNX",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "IndirectSend",
summary = "Use NFS indirect send",
key = "NFS.IndirectSend",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "DiskFileLockUpdateFreq",
summary = "Time (in seconds) between updates to a disk lock file [8-3600]",
key = "NFS.DiskFileLockUpdateFreq",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 8,
max = 3600,
defaultValue = 10,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LockUpdateTimeout",
summary = "Time (in seconds) before we abort an outstanding lock update",
key = "NFS.LockUpdateTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 8,
defaultValue = 5,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LockRenewMaxFailureNumber",
summary = "Number of update failures before a disk file lock is declared stale",
key = "NFS.LockRenewMaxFailureNumber",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100,
defaultValue = 3,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "LockDisable",
summary = "1 to disable NFS locking protocol",
key = "NFS.LockDisable",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HeartbeatFrequency",
summary = "Time in seconds between heartbeats",
key = "NFS.HeartbeatFrequency",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 5,
max = 86400,
defaultValue = 9,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HeartbeatTimeout",
summary = "Time in seconds before we abort an outstanding hearbeat",
key = "NFS.HeartbeatTimeout",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 3,
max = 30,
defaultValue = 5,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HeartbeatDelta",
summary = "Time in seconds since the last successful update before we send a heartbeat",
key = "NFS.HeartbeatDelta",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 3,
max = 30,
defaultValue = 5,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HeartbeatMaxFailures",
summary = "Number of sequential failures before we mark a volume as down",
key = "NFS.HeartbeatMaxFailures",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 10,
defaultValue = 3,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxVolumes",
summary = "Maximum number of mounted NFS volumes",
key = "NFS.MaxVolumes",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 8,
max = 32,
defaultValue = 8,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SendBufferSize",
summary = "Default size of socket's send buffer in KB",
key = "NFS.SendBufferSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 32,
max = 264,
defaultValue = 264,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ReceiveBufferSize",
summary = "Default Size of socket's receive buffer in KB",
key = "NFS.ReceiveBufferSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 64,
max = 264,
defaultValue = 128,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VolumeRemountFrequency",
summary = "Time in seconds before attempting to remount a volume",
key = "NFS.VolumeRemountFrequency",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 30,
max = 3600,
defaultValue = 30,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "UDPRetransmitDelay",
summary = "Time in milliseconds retransmitting a UDP RPC",
key = "NFS.UDPRetransmitDelay",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 2000,
defaultValue = 700,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "OpenWithoutJournal",
summary = "Open file system when out of space for journal allocation, allowing reads and no meta-data updates",
key = "VMFS3.OpenWithoutJournal",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxHeapSizeMB",
summary = "Maximum size (in MB) to which the VMFS-3 heap is allowed to grow",
key = "VMFS3.MaxHeapSizeMB",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 16,
max = 128,
defaultValue = 16,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "SoftMaxDirty",
summary = "Flush immediately if this many buffers are dirty (percent)",
key = "BufferCache.SoftMaxDirty",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100,
defaultValue = 15,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "HardMaxDirty",
summary = "Block writers if this many buffers are dirty (percent)",
key = "BufferCache.HardMaxDirty",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 100,
defaultValue = 95,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "FlushInterval",
summary = "Flush periodically at this interval (msec)",
key = "BufferCache.FlushInterval",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 100,
max = 3600000,
defaultValue = 30000,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "EnableResignature",
summary = "Enable Volume Resignaturing",
key = "LVM.EnableResignature",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "DisallowSnapshotLun",
summary = "Disallow access to snapshot LUN if resignaturing is off. This is ignored if resignaturing is on.",
key = "LVM.DisallowSnapshotLun",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 1,
defaultValue = 1,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxHeapSizeMB",
summary = "Maximum size (in MB) to which the COW heap is allowed to grow",
key = "COW.MaxHeapSizeMB",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 32,
max = 192,
defaultValue = 32,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "MaxDentryPerObj",
summary = "Maximum directory entries cached per directory",
key = "DirentryCache.MaxDentryPerObj",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 60,
max = 30000,
defaultValue = 2500,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "Annotations.WelcomeMessage",
summary = "",
key = "Annotations.WelcomeMessage",
optionType = (vim.option.StringOption) {
dynamicType = <unset>,
valueIsReadonly = false,
defaultValue = "",
validCharacters = <unset>,
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.0.eax",
summary = "Controls the use of Config.Defaults.cpuidMask.val.0.eax; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.0.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.0.ebx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.0.ebx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.0.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.0.ecx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.0.ecx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.0.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.0.edx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.0.edx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.0.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.1.eax",
summary = "Controls the use of Config.Defaults.cpuidMask.val.1.eax; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.1.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.1.ebx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.1.ebx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.1.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.1.ecx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.1.ecx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.1.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.1.edx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.1.edx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.1.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000000.eax",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000000.eax; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000000.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000000.ebx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000000.ebx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000000.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000000.ecx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000000.ecx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000000.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000000.edx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000000.edx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000000.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000001.eax",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000001.eax; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000001.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000001.ebx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000001.ebx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000001.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000001.ecx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000001.ecx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000001.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000001.edx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000001.edx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000001.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000008.eax",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000008.eax; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000008.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000008.ebx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000008.ebx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000008.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000008.ecx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000008.ecx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000008.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.80000008.edx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.80000008.edx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.80000008.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.8000000A.eax",
summary = "Controls the use of Config.Defaults.cpuidMask.val.8000000A.eax; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.8000000A.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.8000000A.ebx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.8000000A.ebx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.8000000A.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.8000000A.ecx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.8000000A.ecx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.8000000A.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.mode.8000000A.edx",
summary = "Controls the use of Config.Defaults.cpuidMask.val.8000000A.edx; legal values "mask", "clobber", or "disable".",
key = "Config.Defaults.cpuidMask.mode.8000000A.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "disable",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.0.eax",
summary = "CPUID override that may be applied to level 0 register eax; controlled by Config.Defaults.cpuidMask.mode.0.eax.",
key = "Config.Defaults.cpuidMask.val.0.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.0.ebx",
summary = "CPUID override that may be applied to level 0 register ebx; controlled by Config.Defaults.cpuidMask.mode.0.ebx.",
key = "Config.Defaults.cpuidMask.val.0.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.0.ecx",
summary = "CPUID override that may be applied to level 0 register ecx; controlled by Config.Defaults.cpuidMask.mode.0.ecx.",
key = "Config.Defaults.cpuidMask.val.0.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.0.edx",
summary = "CPUID override that may be applied to level 0 register edx; controlled by Config.Defaults.cpuidMask.mode.0.edx.",
key = "Config.Defaults.cpuidMask.val.0.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.1.eax",
summary = "CPUID override that may be applied to level 1 register eax; controlled by Config.Defaults.cpuidMask.mode.1.eax.",
key = "Config.Defaults.cpuidMask.val.1.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.1.ebx",
summary = "CPUID override that may be applied to level 1 register ebx; controlled by Config.Defaults.cpuidMask.mode.1.ebx.",
key = "Config.Defaults.cpuidMask.val.1.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.1.ecx",
summary = "CPUID override that may be applied to level 1 register ecx; controlled by Config.Defaults.cpuidMask.mode.1.ecx.",
key = "Config.Defaults.cpuidMask.val.1.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.1.edx",
summary = "CPUID override that may be applied to level 1 register edx; controlled by Config.Defaults.cpuidMask.mode.1.edx.",
key = "Config.Defaults.cpuidMask.val.1.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000000.eax",
summary = "CPUID override that may be applied to level 80000000 register eax; controlled by Config.Defaults.cpuidMask.mode.80000000.eax.",
key = "Config.Defaults.cpuidMask.val.80000000.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000000.ebx",
summary = "CPUID override that may be applied to level 80000000 register ebx; controlled by Config.Defaults.cpuidMask.mode.80000000.ebx.",
key = "Config.Defaults.cpuidMask.val.80000000.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000000.ecx",
summary = "CPUID override that may be applied to level 80000000 register ecx; controlled by Config.Defaults.cpuidMask.mode.80000000.ecx.",
key = "Config.Defaults.cpuidMask.val.80000000.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000000.edx",
summary = "CPUID override that may be applied to level 80000000 register edx; controlled by Config.Defaults.cpuidMask.mode.80000000.edx.",
key = "Config.Defaults.cpuidMask.val.80000000.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000001.eax",
summary = "CPUID override that may be applied to level 80000001 register eax; controlled by Config.Defaults.cpuidMask.mode.80000001.eax.",
key = "Config.Defaults.cpuidMask.val.80000001.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000001.ebx",
summary = "CPUID override that may be applied to level 80000001 register ebx; controlled by Config.Defaults.cpuidMask.mode.80000001.ebx.",
key = "Config.Defaults.cpuidMask.val.80000001.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000001.ecx",
summary = "CPUID override that may be applied to level 80000001 register ecx; controlled by Config.Defaults.cpuidMask.mode.80000001.ecx.",
key = "Config.Defaults.cpuidMask.val.80000001.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000001.edx",
summary = "CPUID override that may be applied to level 80000001 register edx; controlled by Config.Defaults.cpuidMask.mode.80000001.edx.",
key = "Config.Defaults.cpuidMask.val.80000001.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000008.eax",
summary = "CPUID override that may be applied to level 80000008 register eax; controlled by Config.Defaults.cpuidMask.mode.80000008.eax.",
key = "Config.Defaults.cpuidMask.val.80000008.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000008.ebx",
summary = "CPUID override that may be applied to level 80000008 register ebx; controlled by Config.Defaults.cpuidMask.mode.80000008.ebx.",
key = "Config.Defaults.cpuidMask.val.80000008.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000008.ecx",
summary = "CPUID override that may be applied to level 80000008 register ecx; controlled by Config.Defaults.cpuidMask.mode.80000008.ecx.",
key = "Config.Defaults.cpuidMask.val.80000008.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.80000008.edx",
summary = "CPUID override that may be applied to level 80000008 register edx; controlled by Config.Defaults.cpuidMask.mode.80000008.edx.",
key = "Config.Defaults.cpuidMask.val.80000008.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.8000000A.eax",
summary = "CPUID override that may be applied to level 8000000A register eax; controlled by Config.Defaults.cpuidMask.mode.8000000A.eax.",
key = "Config.Defaults.cpuidMask.val.8000000A.eax",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.8000000A.ebx",
summary = "CPUID override that may be applied to level 8000000A register ebx; controlled by Config.Defaults.cpuidMask.mode.8000000A.ebx.",
key = "Config.Defaults.cpuidMask.val.8000000A.ebx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.8000000A.ecx",
summary = "CPUID override that may be applied to level 8000000A register ecx; controlled by Config.Defaults.cpuidMask.mode.8000000A.ecx.",
key = "Config.Defaults.cpuidMask.val.8000000A.ecx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "cpuidMask.val.8000000A.edx",
summary = "CPUID override that may be applied to level 8000000A register edx; controlled by Config.Defaults.cpuidMask.mode.8000000A.edx.",
key = "Config.Defaults.cpuidMask.val.8000000A.edx",
optionType = (vim.option.StringOption) {
dynamicType = "",
valueIsReadonly = false,
defaultValue = "",
validCharacters = "",
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "security.host.ruissl",
summary = "Require SSL to be used when communicating with the host over port 902.",
key = "Config.Defaults.security.host.ruissl",
optionType = (vim.option.BoolOption) {
dynamicType = "",
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = "",
label = "guest.commands.sharedPolicyRefCount",
summary = "Reference count to enable guest operations.",
key = "Config.GlobalSettings.guest.commands.sharedPolicyRefCount",
optionType = (vim.option.IntOption) {
dynamicType = "",
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ScratchConfig.ConfiguredScratchLocation",
summary = "The directory configured to be used for scratch space.Changes will take effect on next reboot.",
key = "ScratchConfig.ConfiguredScratchLocation",
optionType = (vim.option.StringOption) {
dynamicType = <unset>,
valueIsReadonly = false,
defaultValue = "",
validCharacters = <unset>,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ScratchConfig.ConfiguredSwapState",
summary = "Whether userwold swap is configured to be enabledChanges will take effect on next reboot.",
key = "ScratchConfig.ConfiguredSwapState",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = false,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ScratchConfig.CurrentScratchLocation",
summary = "The directory currently being used for scratch space",
key = "ScratchConfig.CurrentScratchLocation",
optionType = (vim.option.StringOption) {
dynamicType = <unset>,
valueIsReadonly = true,
defaultValue = "",
validCharacters = <unset>,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "ScratchConfig.CurrentSwapState",
summary = "Whether userworld swap is currently enabled",
key = "ScratchConfig.CurrentSwapState",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = true,
supported = false,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "Syslog.Local.DatastorePath",
summary = "Datastore path of file to which local syslogd data is written.",
key = "Syslog.Local.DatastorePath",
optionType = (vim.option.StringOption) {
dynamicType = <unset>,
valueIsReadonly = false,
defaultValue = "",
validCharacters = <unset>,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "Syslog.Remote.Hostname",
summary = "Hostname to which syslog data will be forwarded. Disabled on null.",
key = "Syslog.Remote.Hostname",
optionType = (vim.option.StringOption) {
dynamicType = <unset>,
valueIsReadonly = false,
defaultValue = "",
validCharacters = <unset>,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "Syslog.Remote.Port",
summary = "Port to which syslog data will be forwarded.",
key = "Syslog.Remote.Port",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 1,
max = 65535,
defaultValue = 514,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.ACPI",
summary = "Initialize ACPI CA.",
key = "VMkernel.Boot.ACPI",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.acpiDbgLevel",
summary = "ACPI debug level",
key = "VMkernel.Boot.acpiDbgLevel",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.assumeCommonBusClock",
summary = "Assume all NUMA nodes run off a common, synchronous bus clock (normally autodetected).",
key = "VMkernel.Boot.assumeCommonBusClock",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.assumePerNodeBusClock",
summary = "Assume each NUMA node has a separate bus clock (normally autodetected).",
key = "VMkernel.Boot.assumePerNodeBusClock",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.baudRate",
summary = "Baud rate to run the serial port at.",
key = "VMkernel.Boot.baudRate",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 115200,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.buddyPhysicalMemoryDebugStruct",
summary = "Buddy physical mem debug info switch.",
key = "VMkernel.Boot.buddyPhysicalMemoryDebugStruct",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.busSpeedMayVary",
summary = "Allow different bus clock speeds, even within a single NUMA node or SMP system.",
key = "VMkernel.Boot.busSpeedMayVary",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.busSpeedMayVaryPerNode",
summary = "Allow substantially different bus clock speeds in different NUMA nodes.",
key = "VMkernel.Boot.busSpeedMayVaryPerNode",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.checkCPUIDLimit",
summary = "Refuse to run on CPUID limited cpus.",
key = "VMkernel.Boot.checkCPUIDLimit",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.clockMultiplierMayVary",
summary = "Allow different CPU clock multipliers, even within a single NUMA node or SMP system.",
key = "VMkernel.Boot.clockMultiplierMayVary",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.clockMultiplierMayVaryPerNode",
summary = "Allow different CPU clock multipliers in different NUMA nodes.",
key = "VMkernel.Boot.clockMultiplierMayVaryPerNode",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.coresPerPkg",
summary = "Number of cores per package that vmkernel should use",
key = "VMkernel.Boot.coresPerPkg",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 255,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.correctBSPMTRRMasks",
summary = "Correct BSP Variable MTRR masks to match the processor physical address bit support",
key = "VMkernel.Boot.correctBSPMTRRMasks",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.cpuCellSize",
summary = "Requested cpu scheduler cell size.",
key = "VMkernel.Boot.cpuCellSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 255,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.debugBreak",
summary = "Break into debugger during vmkernel initialization.",
key = "VMkernel.Boot.debugBreak",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.dumpDiag",
summary = "Dump diagnostics information.",
key = "VMkernel.Boot.dumpDiag",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.executePOST",
summary = "Run POST tests.",
key = "VMkernel.Boot.executePOST",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.fakeNUMAnodes",
summary = "Fake # NUMA nodes on UMA systems.",
key = "VMkernel.Boot.fakeNUMAnodes",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 255,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.fastHzEstimate",
summary = "Use ACPI PM timer for frequency estimation at boot.",
key = "VMkernel.Boot.fastHzEstimate",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.forceCRS",
summary = "Always use IRQ from _CRS",
key = "VMkernel.Boot.forceCRS",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.fsCheck",
summary = "Run filesystem checks on system partitions.",
key = "VMkernel.Boot.fsCheck",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.hyperthreading",
summary = "Enable hyperthreading if available.",
key = "VMkernel.Boot.hyperthreading",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.ioapic",
summary = "Use IOAPICs.",
key = "VMkernel.Boot.ioapic",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.logOnScreen",
summary = "Display vmkernel log on screen.",
key = "VMkernel.Boot.logOnScreen",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.logSynchronous",
summary = "Print log messages to screen and/or serial port synchronously.",
key = "VMkernel.Boot.logSynchronous",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.logicalApicId",
summary = "Use logical not physical APIC IDs.",
key = "VMkernel.Boot.logicalApicId",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.maxPCPUS",
summary = "Number of PCPUs vmkernel should use.",
key = "VMkernel.Boot.maxPCPUS",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 32,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.memCheckEveryWord",
summary = "Check every single word when checking mem.",
key = "VMkernel.Boot.memCheckEveryWord",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.memmapMaxPhysicalMemMB",
summary = "Maximum physical memory (in MB) recognized by kernel",
key = "VMkernel.Boot.memmapMaxPhysicalMemMB",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 262144,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.memmapStressHighBitMPNs",
summary = "Test > 64GB physical RAM support by ignoring 4GB - 64GB range",
key = "VMkernel.Boot.memmapStressHighBitMPNs",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.mpsIntRouting",
summary = "Use MPS interrupt routing.",
key = "VMkernel.Boot.mpsIntRouting",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netESX2LegacyMode",
summary = "ESX2 Legacy networking config compatability.",
key = "VMkernel.Boot.netESX2LegacyMode",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netMaxPCPUPktCacheSize",
summary = "Maximum number of pkt buffers queued in each PCPU slab cache.",
key = "VMkernel.Boot.netMaxPCPUPktCacheSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 128,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netNetqueueEnabled",
summary = "Enable/Disable NetQueue support.",
key = "VMkernel.Boot.netNetqueueEnabled",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netNumGPBuffers",
summary = "Number of general purpose buffers to allocate up front.",
key = "VMkernel.Boot.netNumGPBuffers",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 1024,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netNumPortsets",
summary = "Maximum number of portsets.",
key = "VMkernel.Boot.netNumPortsets",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 128,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netPanicBadDevOpen",
summary = "panic if device has a bad open handler.",
key = "VMkernel.Boot.netPanicBadDevOpen",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netPktBufUseSlab",
summary = "Whether to allocate PktBufDescriptor from the pkt slab allocator.",
key = "VMkernel.Boot.netPktBufUseSlab",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netPktHeapMaxSize",
summary = "Maximum size in MB of the pkt buffer heap (advisory only).",
key = "VMkernel.Boot.netPktHeapMaxSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netPktHeapMinSize",
summary = "Minimum size in MB of the pkt buffer heap (advisory only).",
key = "VMkernel.Boot.netPktHeapMinSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 2,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netPktNumSlabSizes",
summary = "Number of different slab sizes for the allocator.",
key = "VMkernel.Boot.netPktNumSlabSizes",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 4,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netUseMemcpyNt",
summary = "Enable/Disable non temporal memcpy in packet copy.",
key = "VMkernel.Boot.netUseMemcpyNt",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.netUseProc",
summary = "Enable/Disable /proc nodes.",
key = "VMkernel.Boot.netUseProc",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.oem",
summary = "Enable OEM extensions.",
key = "VMkernel.Boot.oem",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.overrideSerialPortAddr",
summary = "UART I/O address",
key = "VMkernel.Boot.overrideSerialPortAddr",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.pageSharing",
summary = "Enable page sharing.",
key = "VMkernel.Boot.pageSharing",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.panicOnVmkernelAbort",
summary = "Panic if vmkernel aborts initialization.",
key = "VMkernel.Boot.panicOnVmkernelAbort",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.realNMI",
summary = "Use real NMI for LINT1.",
key = "VMkernel.Boot.realNMI",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.serialPort",
summary = "0 = disable, 1 = COM1, 2 = COM2.",
key = "VMkernel.Boot.serialPort",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 255,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.storageHeapMaxSize",
summary = "Maximum size in bytes of the main storage heap",
key = "VMkernel.Boot.storageHeapMaxSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.storageHeapMinSize",
summary = "Minimum size in bytes of the main storage heap",
key = "VMkernel.Boot.storageHeapMinSize",
optionType = (vim.option.IntOption) {
dynamicType = <unset>,
valueIsReadonly = false,
min = 0,
max = 2147483647,
defaultValue = 0,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.techSupportMode",
summary = "Allow VMware Tech Support Mode access.",
key = "VMkernel.Boot.techSupportMode",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.timerEnableACPI",
summary = "Enable ACPI PM timer as system reference timer.",
key = "VMkernel.Boot.timerEnableACPI",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.timerEnableHPET",
summary = "Enable HPET as system reference timer.",
key = "VMkernel.Boot.timerEnableHPET",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.timerEnableMPMC",
summary = "Enable Cyclone MPMC timer as system reference timer.",
key = "VMkernel.Boot.timerEnableMPMC",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.timerEnableTSC",
summary = "Enable TSC as system reference timer.",
key = "VMkernel.Boot.timerEnableTSC",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.timerForceTSC",
summary = "Always use TSC as system reference timer.",
key = "VMkernel.Boot.timerForceTSC",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.usbBoot",
summary = "Require USB boot if bootFS.",
key = "VMkernel.Boot.usbBoot",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.useNUMAInfo",
summary = "enable/disable NUMA-ness",
key = "VMkernel.Boot.useNUMAInfo",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.useTSCForCPUHz",
summary = "On systems where TSC and CPU frequencies are the same, determines whether to use TSC or the non-halted clock cycles MSR to determine CPU frequency.",
key = "VMkernel.Boot.useTSCForCPUHz",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.uwSwap",
summary = "Enable Userworld Swap.",
key = "VMkernel.Boot.uwSwap",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.vmkKeyboard",
summary = "Enable vmkernel keyboard driver.",
key = "VMkernel.Boot.vmkKeyboard",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.vmkTerminals",
summary = "Enable switching to vmkernel terminals.",
key = "VMkernel.Boot.vmkTerminals",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.xapicAMDDetect",
summary = "Detect xapic on opteron",
key = "VMkernel.Boot.xapicAMDDetect",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = true,
},
},
(vim.option.OptionDef) {
dynamicType = <unset>,
label = "VMkernel.Boot.xapicForce",
summary = "Force APIC ID to 8 bits",
key = "VMkernel.Boot.xapicForce",
optionType = (vim.option.BoolOption) {
dynamicType = <unset>,
valueIsReadonly = false,
supported = true,
defaultValue = false,
},
}
]
The example output has been broken up in 3 isolated parts so that it renders properly. This was too much content for our poor wiki engine to display in one go.
